12
13
1
2
Align the holder with the
open lock symbol, insert,
then rotate 60
o
past the
closed lock symbol.
Ensure the holder is
fully locked before
dispensing.
Place 1 or 2 warmed cups or
a mug under the nozzles of
the filter holder. Make sure
your cups are directly under
both nozzles.
3
To extract your espresso,
turn the control knob anti-
clockwise to the cup symbol.
You will hear the pump
operating.
4
5
The espresso will flow out of the
filter nozzles. This may take a few
seconds. The temperature light
may cycle on / off; this is normal.
When the cup has been filled
to the desired level (about 15-
20 seconds for an espresso)
turn the control knob to the
‘0’. Then press the power
button and
UNPLUG
AFTER EACH USE.
THE ESPRESSO SHOT
The basis of all the coffee drinks is the espresso shot.
When using the filter holder,
knock out the grounds over
a bin. Rinse the filter under
running water to remove any
coffee grounds. Use the filter
pin to unblock if required.
6
CLEAN FILTER
TURN ON
TURN OFF
CUPS OR MUGS
EXTRACTION
ATTACH HOLDER
U
N
PL
U
G
W
HEN N
OT
IN
U
SE
LOCK
1
2
Coffee pods are available
directly from retail outlets,
www.dualit.com/coffee-pods
or call Dualit sales on 01293
652 500 (UK delivery only).
Select the ESE pod filter and
snap into the filter holder.
3
Place one fresh coffee pod
into the ESE filter. Each pod
is individually wrapped so you
only use what you need.
4
5
Make sure there is no gap
between the pod and filter
edge, or water will flow
round the pod and your
espresso will be diluted.
Make sure all the paper
is tucked inside the filter
before attaching the filter
holder to the brewhead.
USING ESE COFFEE PODS
ESE (Easy Serving Espresso) pods are individually wrapped and pre-tamped ensuring the perfect
espresso every time. Look for the ESE logo on compatible coffee pods.
Use the tab to remove the
pod once the coffee has
been made.
6
REMOVE WITH
TAB
INSERT POD
TUCK TAB
THE ESE FILTER
CHECK SEAL
PURCHASE PODS
