Dualit DBL4, Instruction Manual & Guarantee

Page: 13 / 26

Cause(s) Solution(s)
My blender stops turning whilst processing
1. Jar may not be correctly seated on the main body.
It may have jumped up while blending.
1. Check the jar has not lifted up during blending,
always blend with a gloved hand
holding the jar down.
2. to prevent over process The blender will switch
off automatically after 1 & 1/2 minutes.
2. This saftey feature will stop the motor, the control
panel will flash 3 times and and the blender will
revert back to standby.
3. The ingredients you are processing are too thick 3. Stop immedently, remove jar from base and uplug.
Thin dow the mixture or this may not be suitable for
blending.
4 . The blender features a motor overload protection
feature. If the motor is being overloaded, the control
panel will remain lit and the motor will stop.
4. To restart it again, unplug from the mains and
let it cool down for a minimum of 30 minutes. The
blender will not be ready to use again untill it has
cooled down.
My jar is looking cloudy
1. Over time blending hard items may scratch
the inside of the jar.
1. Over time blending very hard items by cloud the
jar. Consider buying a spare jar
if you intend to blend hard items on a regular basis.
2. You may have used the wrong dishwasher setting. 2. Only dishwasher on a cycle below 40oC and
place on the top shelf.
My mixture is not blending evenly
1. The wrong setting may be selected. 1. Use the chart on page 11 as a guide. As a general
rulefor dry ingredents start by
using Auto pulse and for liquid mixtures add the
liquid first then the solid items on top.
2. Food is sticking to the sides of the jar and not
blending.
2. Stop the blender, remove the jar off the blender
base and use a spatula to
redistribute the food items in to the centre of the jar.
The Jar is leaking?
1. Blade not correctly threaded in to the jar. 1. Remove the blade and re attach taking care the
blade is secureley attached to the base of the jar.
2. Gasket may be missing, damaged or not
correctly seated on the blade.
2. Examine the gasket for damages, ensure it is
seated securerly in place and reassemble.
3. Blade assembly not tight enough in the jar. 3. Hand tighten the blade by turning anti-clockwise.
Go as far as you can so it does not move. Only use
the tool provided to undo the blade assembly.
The lid is loosening off whilst blending?
1. The rim of the jar may have food items stuck. 1. Wipe the rim of the jar after every use.
2. The lid is not pushed down enough. 2. Always check the lid is securerley pushed down
and is locked in to the jar. Attach the lid by applying
a slight twisting actionpushing down while.
13
English