manualshive.com logo in svg

duagon MC50M, User Manual, Page: 2 / 85

Share
Download
duagon MC50M User Manual Download Page 2

20MC50M00 E5 

 

2020-10-20

2

Contents   

Contents

Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About this Document  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.1 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

1.2 Product Architecture  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

1.2.1

Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

1.2.2

Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

1.3 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

1.4 Cooling Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

1.5 Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

1.6 Identification of DIN-Rail Systems  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.1 Unpacking the MC50M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

2.2 Configuring the Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

2.2.1

Installing In-System Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

2.3 Mounting the MC50M  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

2.3.1

Safety Instructions for Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

2.3.2

Mounting the System on a DIN Rail. . . . . . . . . . . . . . . . . . . . . . . . . .27

2.4 Connecting and Starting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

2.4.1

Safety Instructions for Connection . . . . . . . . . . . . . . . . . . . . . . . . . .29

2.4.2

Connecting an Earthing Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

2.4.3

Connecting Peripherals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

2.4.4

Connecting the Power Supply  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

2.4.5

Starting Up the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

2.4.6

Configuring the UEFI Firmware for PXE Boot. . . . . . . . . . . . . . . . . .33

2.5 Installing Operating System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

2.6 Using the MC50M under Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

2.6.1

Linux Support for Individual Functions. . . . . . . . . . . . . . . . . . . . . . .34

2.6.2

Yocto Linux Board Support Package (BSP) . . . . . . . . . . . . . . . . . . . .35

2.6.3

Accessing SMBus/I2C Devices using Standard Linux I2C Tools. . .35

2.6.4

Triggering the BMC Watchdog Directly via CPU GPIO  . . . . . . . . . .35

2.6.5

Managing RTC Time Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . .36

2.6.6

Configuring the Serial Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

2.6.7

Accessing User LEDs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

2.7 Using the MC50M under Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

2.7.1

Windows Support for Individual Functions  . . . . . . . . . . . . . . . . . . .44

2.7.2

Managing RTC Time Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . .45

2.7.3

Configuring the Serial Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

3 Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

3.1 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

3.1.1

Pin Assignment for Product Versions 06MC50Mxx. . . . . . . . . . . . .46

Summary of Contents for MC50M






















































































Reviews:

No comments