Universal Drinking Water Series
V4.3D
3
KITCHEN FAUCET
KITCHEN FAUCET
FAUCET FOR
FILTERED WATER
HOT WATER
VALVE
COLD WATER
VALVE
PURCHASED
SEPARATELY
FLEXIBLE TUBING INSTALLATION
Proper Installation
Please read all instructions, specifications, and precautions before installing and using your water filter system.
This filter must be protected
from freezing, which can
cause cracking of the filter
and water leakage.
Because of the product’s limited service life and to prevent costly repairs or possible water damage, we strongly
recommend that the housing be replaced every five years. If the head of the filter has been in use for longer than
this period, it should be replaced immediately. Date the top of any new head to indicate the next recommended
replacement date.
Precautions:
For cold water use only.
After prolonged periods of non-use (such as during a vacation), it is recommended that the system be flushed thoroughly. Let water run for 10 minutes
before using.
The filter cartridges used with this system have a limited service life. Changes in taste, odor, and/or flow of the water being filtered indicate that the
cartridge should be replaced.
This filter system provides stated contaminant reduction and capacity claims when used with an auxiliary faucet.
Check under the sink to locate a solid wall surface to mount the Filter System.
NOTE: The Filter System must be mounted in a vertical position.
Determine if the Filter System will be used to filter water through the existing kitchen faucet (page 3) or through auxiliary
faucet (page 6) for filtered water.
Locate the cold water pipe under your sink and observe if it is a flexible hose or a rigid pipe (ex.: plastic, metal, copper). Rigid pipes
may require cutting in order to make adequate space to install the fittings. Also determine if you have all appropriate fasteners and
adaptors to fit your plumbing.
Consult your local plumbing codes and install accordingly.
Before You Begin
CAUTION
CAUTION
