DTS FOS 100 SOLO ON-OFF WHITE 36, User Manual

Page: 21 / 28

Up-Down ENTER
ENTER
MENU
Up-Down
ENTER
SLAVE MODE
Slave mode for ChPr program.
All slave units will be
synchronised with master unit,
running their own Chpr program.
Up-Down ENTER
MENU
Up-Down
ENTER
INFRARED MODE
Infrared remote control.
By activating Ir MODE, it will be
possible to navigate trought the
unit functions by using the D.T.S.
infrared remote control.
D.T.S. Code :0514L008
NOTE:
External infrared remote sensor
needed.
D.T.S. Code :03.LA.016
NOT IMPLEMENTED ON FOS 100
EMERGENCY
Emergency operating mode.
By setting Emergency mode, it
will be possible to select one of
the 16 preprogrammed WHITE
cues that will then ran if DMX
signal is missing or not available.
Usefull for Emergency EXIT
ilumination on public areas.
Up-Down MENU
Up-Down ENTER Up-Down ENTER
ENTER
ENTER
Default = OFF
Default = White 1
Default = 255
ENTER
DMX Recorder Mode
For the programming of ChPr by using a DMX controller, besides the 10 channels necessary to control the unit a further 3
DMX channels are needed.
So that in RECORDER mode (via DMX) the unit will need 13 channels to be correctly programmed.
The three new DMX channels are:
DMX channel 11 = SCENES channel
From 0-10 = no function (r001)
From 11-255 are displayed the programmable scenes (max 16 scenes from M001 to M0016 )
DMX channel 12 = EDIT channel:
-From 0-19 = no function
-From 20-234 the unit runs the configuration given by the received input DMX values.
With the channel SCENES it is possible to pass from one step to the next while with REC it is possible to record the
selected scene.
-From 235-255 the unit runs the configuration given by the received input DMX values closing the sequence as last scene.
With the channel REC it is possible to record the selected scene as last scene.
DMX channel 13 = RECORDING channel
Records the set scene with a variation between 0 to 255 (the display flashes indicating that the scene has been
recorded).It is advised that you keep the REC channel set to 0 and to run through the 255 only once you have decided to
save the scene. If ChPr is not closed, by indicating the last scene ( Edit channel between 235-255), in playback mode all
16 scenes will be played through even if not programmed
Up-Down ENTER
MENU Up-Down
ENTER
FAN SPEED CONTROL
Internal Fan Speed control
selectable by user.
Range: OFF - 24 volt
Default : 12 volt
Fan Speed Control
Range: OFF - 24 volt
Default = 12 volt
Up-Down ENTER
MENU Up-Down
ENTER
WIRELESS DMX
Wireless DMX enabled/disabled.
Wireless DMX receiver kit on FOS
100 is available on request.
WIRELESS DMX Disabled
(Default)
WIRELESS DMX Enabled
Up-Down
ENTER
UNLINK = LOG OUT
FOS 100 WHITE 36 20