9.3- Movement
The projector has a maximum movement of 280° for Pan,180° for Tilt 1 and 135° for tilt 2
(7 mechanical steps 22,5° each).
DO NOT place any obstructions in the path of the projector's movement.
9.4- Risk of fire
Each fixture produces heat and must be installed in a well-ventilated place. The minimum recommended
distance from flammable material is 1 MT.
Minimum distance from the object being illuminated is 0,5 MT.
9.5- Forced ventilation
You will note, on inspection, that the unit feature a thermal dissipator on the head. This should, under no
circumstances, be blocked or obstructed whilst the projector is in operation.
Doing so could cause the fixture to seriously overheat thereby compromising its proper operation.
9.6- Ambient temperature
The projector should never be installed in places that lack a constant air flow. The ambient temperature
should NOT exceed 40°C.
10- MAINS CONNECTION
DELTA 8 R operate at 90-260 VOLT 50-60 Hz.
Prior to connecting the unit to your mains supply,
ensure that the model in your possession
correctly matches the mains supply available.
For connection purposes, ensure that your plug
is capable of supporting 1,20 amps at 230V,
Or 3 amps at 90 V.
Strict adherence to regulatory norms
is strongly recommended.
10.1- Protection
The use of a thermal magnetic circuit breaker is recommended for each DELTA 8 R.
A good earth connection is essential for the correct operation of the projector.
0,5M
F
!
DMX OUT
DMX 512
1 GND
2 DATA-
3 DATA +
ANTENNA
WIRELESS
DMX
90-260 Vac
50/60 Hz
DMX IN
Mains
90-260V AC 50 / 60Hz
DELTA 8 R
10
Tilt 2 mechanical
regulation
TILT1 180°
Motorized
PAN 280°
TILT2 135°
Mechanical
WARNING
Do not place
any object in the path
of the projector’s
movement
!
