DC 9V
PHONES JACK
A U X I N
CD player
MASTER
OUT
AMPLIFIER
Part 3: Functions
.
1. Setting up the drum kit
To turn the drumkit on and off, use the POWER switch located
on the left side of the drum module. When the drum kit is
turned on, the number of the selected drumkit will appear in
the LED-display.
Connect the module to a power socket
carrying the correct voltage (indicated
on the rear panel). Use the enclosed
power cord. Never connect the module
to a power socket that is also supplying
power to electric engines or big dome-
stic appliances. Always avoid connec-
ting too many electric devices to the
same power socket.
2. Adjusting the volume
There are several ways to listen to the sound of your electro-
nic drumset. By turning the volume pots you can adjust your
preferred volume level.
Start playing at low volume and then increase the volume to
desired level. Do not set the speaker volume level too high.
2.1 Connecting headphones
A pair of headphones can be connected to the drum modu-
le. The headphone jack is located on the front panel of the
module. Connect the headphones to the module and use the
PHONES fader to adjust the headphone volume level.
2.2 Aux In Input
Through the AUX IN Input jack an external sound source, for
example a CD-/MP3-Player, may be connected to the drumkit
and amplified by the module. This makes it possible to playa-
long to the music played by the CD-Player. Use the AUX IN
fader to adjust the volume level of the external sound source.
2.3 Master Out Output
The MASTER OUT jack can be used to deliver the output of the
drumkit to a stereo sound system, mixing console or recor-
ding device. The MASTER OUT level can be adjusted by using
the MASTER volume pot.
37
Part 3: Functions
37
