39
CHAPTER 5 SOFTWARE
INSTALLATION
In order to let the system board to work efficiently, a series of drivers have to install according
to the operating system used. The drivers may be delivered via CD-ROM or floppy diskettes.
The device driver installation procedures from CD-ROM and floppy diskettes are similar. The
only difference is the path of the driver location. Please refer to the following section for the
installation procedures for floppy diskettes. For CD-ROM installation, please refer to the
README.TXT file on the Root Directory of the CD-ROM.
5.1 VIA BUS MASTER PCI IDE DRIVER FOR
WINDOWS 95/WINDOWS 98
a)
Under Windows 95, insert the CD title into the CD-ROM drive (say D:)
b)
Click Start on the taskbar in Windows 95
c)
Click Run on the menu bar in Windows 95
d)
Type D:\84ivbx\drivers\Ide master\setup.exe (D: being the letter of CD-ROM
drive)
e)
Follow the on screen instructions to complete the installation. Restart Windows
95 to let the drivers take function.
5.2 AGP VxD SETUP PROGRAM
a)
Under Windows 95, insert the CD title into the CD-ROM drive (say D:)
b)
Click Start on the taskbar in Windows 95
c)
Click Run on the menu bar in Windows 95
d)
Type D:\84ivbx\drivers\agpvxd\setup.exe (D: being the letter of CD-ROM
drive)
e)
Follow the on screen instructions to complete the installation. Restart Windows
95 to let the drivers take function.
5.3 VIA PCI MINIPORT DRIVER SETUP PROGRAM
a)
Under Windows 95, insert the CD title into the CD-ROM drive (say D:)
b)
Click Start on the taskbar in Windows 95
c)
Click Run on the menu bar in Windows 95
d)
Type D:\84ivbx\drivers\xirq\setup.exe (D: being the letter of CD-ROM drive)
e)
Follow the on screen instructions to complete the installation. Restart Windows
95 to let the drivers take function.
Summary of Contents for PRM-0084I VBX
