Jumper Settings
7
2.3
JCC - CLEAR CMOS DATA
JCC is used to clear the content of the CMOS Data in the RTC (build in PIIX4 chip).
Table 1: Clear CMOS Data
Note:
You must power down the AC supply (111/220V) when you want to clear
CMOS.
2.4
JP2 – CPU SPEED PROTECTION
This jumper sets CPU speed can change or not.
JP2
CPU Speed
2-3
selection
1-2
show only
Table 2
2.5
MEMORY CONFIGUARTION
The mainboard lets user upgrade system memory via DIMM sockets on the
mainboard. On board memory is located in six banks: Bank 0 - 5. Three DIMM
sockets are provided for Synchronous DRAM. Table 3 provides the typical memory
configurations supported by the mainboard.
Summary of Contents for PRM-0084I VBX
