Chapter 3
10
3.1
MULTIPLE FUNCTION JUMPER
Multiple function jumper includes speaker, reset, keylock, harddisk LED, ATX
power switch,
Fig. 4a Multiple Function Jumper
•
RESET – RESET SWITCH CONNECTOR
Attach the Reset switch cable to this connector. The Reset switch restarts the
system.
•
POWER – POWER ON/OFF SWITCH
It is used to switch on or off the ATX power supply. The power is turned on by
short the power switch once. It needs to hold the power switch about 4 seconds
to turn it off when it has not start to display.
•
SLEEP – HARDWARE GREEN CONNECTOR
Sleep is for SMI Break switch setting. When Sleep is trigger from Open to
Close and back to Open, the system would suspend immediately.
Summary of Contents for PRM-0084I VBX
