DTK PRM-0084I VBX, User Manual

Page: 35 / 55

Chapter 4
30
4.5 POWER MANAGEMENT SETUP MENU
The Power Management Setup option is used to change the values of the chipset
registers for system power management functions.
ROM PCI/ISA BIOS (2A6LGG3A)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function
Power Management
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off by PWRBTN : Disabled
: User Define
: Yes
: Suspend
→
Off
: V/H SYNC + Blank
: 3
: Delay 4 sec.
Primary INTR
IRQ 3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ 6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm) : ON
: Primary
: Primary
: Primary
: Primary
: Primary
: Disabled
** PM Timers ** IRQ9 (IRQ2 Redir) : Secondary
HDD Power Down
Suspend Mode : Disabled
: Disabled IRQ10 (Reserved)
IRQ11 (Reserved) : Secondary
: Secondary
** PM Events ** IRQ12 (PS/2 Mouse) : Primary
VGA
LPT & COM
HDD & FDD
DMA/master : OFF
: LPT/COM
: ON
: OFF IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved) : Primary
: Primary
: Disabled
Wake Up On LAN
Modem Ring Resume
RTC Alarm Resume : Enabled
: Disabled
: Disabled
ESC: Quit
↑ ↓ → ←
: Select Item
F1: Help PU/PD/+/-: Modify
F5: Old Values (Shift)F2: Color
F7: Load Setup Defaults
Fig. 23
A short description of the screen items follows:
ACPI Function: To enabled feature for supporting the operating system with Advanced
Configuration and Power Interface. (such as Windows 98)
Power Management: Available selections are “User Define”, “Max Saving” and “Min Saving”:
“User Define” makes the time period waiting for Suspend Mode to be programmed.
“Max Saving” will set the time period waiting for Suspend Mode to be 1 minute.
“Min Saving” will set the time period waiting for Suspend Mode to be 1 hour.
PM Control by APM: Available options are “Yes” and “No”. To choose “Yes” to let the Power
Management Function to be control by the MS APM software.