DTK PRM-0075I, User Manual

Page: 46 / 80

Chapter 4
40
4.7 INTEGRATED PERIPHERALS SETUP MENU
The Integrated Peripherals setup option is need to change the values of the I/O chipset
registers for I/O functions.
ROM PCI/ISA BIOS (2A59ID1G)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
On-Chip Primary IDE
On-Chip Secondary IDE
USB Keyboard Support
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2 : Disabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Enabled
: Enabled
: Disabled
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3 ECP Mode Use DMA
EPP Mode Select : 1
: EPP1.9
Onboard UART2 Mode
Onboard Parallel Port
Parallel Port Mode
: Standard
: 3BC/IRQ7
: ECP+EPP
ESC: Quit
↑↓→ ←
: Select Item
F1: Help PU/PD/+/-: Modify
F5: Old Values (Shift)F2: Color
F7: Load Setup Defaults
Fig. 26
A short description of the screen items follows:
IDE HDD Block Mode: This allows your hard disk controller to use the fast block mode to
transfer data to your hard disk drive.
IDE Primary Master PIO/IDE Primary Slave PIO/IDE Secondary Master PIO/IDE
Secondary Slave PIO: Available selection are “Auto”, “Mode 0”, “Mode 1”, “Mode 2”, “Mode
3” and “Mode 4”. To choose “Auto”, the system BIOS will scan the IDE device and decide
which mode of the device is . Otherwise the user should key in the mode of the device to the
corresponding field.
Some harddisks cannot work properly with its corresponding timing, please set a slower
timing.