DTK PRM-0075I, User Manual

Page: 42 / 80

Chapter 4
36
Memory Hole At 15M-16M: Choose Enabled or Disabled. “Enabled” allows some linear VGA
cards to run larger frame port, or it can be reserved for some operating system.
PCI 2.1 Compliance: Select Enabled to support compliance with PCI specification version 2.1.
The chipset has an embedded 32-bit posted write-buffer to support delay transactions cycles.
4.5 POWER MANAGEMENT SETUP MENU
The Power Management Setup option is used to change the values of the chipset
registers for system power management functions.
ROM PCI/ISA BIOS (2A59ID1G)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define ** Reload Global Timer Events **
PM Control by APM
Video Off Method
Video off After
MODEM Use IRQ
Suspend Mode
HDD Power Down
Suspend Mode Option
VGA Active Monitor
Soft-Off by PWR-BTTN
Resume by Ring
IRQ 8 Break Suspend : Yes
: V/H SYNC+Blank
: Suspend
: 3
: Disabled
: Disabled
: PowerOn Suspend
: Enabled
: Delay 4 Sec.
: Enabled
: Disabled IRQ [3-8, 9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port : Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
ESC: Quit
↑ ↓ → ←
: Select Item
F1: Help PU/PD/+/-: Modify
F5: Old Values (Shift)F2: Color
F7: Load Setup Defaults
Fig. 24
A short description of the screen items follows:
Power Management: Available selection are "Disabled", "User Define", "Max Saving" and "Min
Saving":
"Disabled" will disable all the power saving functions.
"User Define" makes the time period waiting for Suspend Mode to be programmed.
"Max Saving" will set the time period waiting for Suspend Mode to be 1 minute.
"Min Saving" will set the time period waiting for Suspend Mode to be 1 hour.