background image

             TWO YEAR WARRANTY

DTC Communications, Inc. (DTC) warrants its RF transmitting and receiving products to be free from

defects in workmanship or material for a period of two (2) years from the date of shipment unless

otherwise stated.

The liability of DTC, Inc. under this warranty is limited to replacing, repairing, or issuing credit, at

option, for any products, which are returned by the purchaser during such warranty period, provided:

DTC is notified and a Repair Authorization Number is issued by DTC Customer Service within 30 days

after discovery of such defects by Customer.

The defective units are returned to DTC with transportation charged Prepaid by the Customer.

Product damaged in shipment must be reported to and claim forms filed with the Carrier by the

Customer.  In shipments to the factory, notice and claim procedures will be initiated by DTC.

DTC’s examination of such products shall disclose to its satisfaction that such defects exist and have

not been caused by misuse, misapplication, neglect, improper installation, improper storage, alteration,

physical damage or accidents.

The warranty shall not apply to material or accessories ordinarily susceptible to field damage or of a

disposable nature.  Examples include batteries, antennas, microphones, headsets, cases, accessory

bags, etc. The warranty shall not apply to Engineering Prototypes or Customer requested modifications

to electronic circuits.

This warranty does not apply to and DTC does not independently warrant items or systems sold by DTC

which are produced by other manufacturers.  With respect to such items, the Customer shall look to the

warranty of the original manufacturer and DTC disclaims all warranty, expressed or implied.

Nothing in this warranty, or any statement, brochure, bulletin, or advertisement is to be interpreted as

establishing the suitability of any product for particular application or use.  Applications of the product

and the determination of suitability for any application, is the sole responsibility of the Customer.

Summary of Contents for VidiVest Palladium





















Reviews: