9
COLLAR PARTS & FUNCTIONS
CAUTION
If the collar belt is too long, we recommend looping the ex-
cess collar belt back around through the buckle. We DO
NOT recommend cutting the collar belt. Cutting the collar
belt can drastically reduce the range of your collar unit.
However, the collar belt can be cut up to about 3 inches
without greatly affecting the range.
Collar Belt with MAXX-Range™ Antenna
- The
embedded MAXX-Range™ Antenna is woven into the
collar belt and runs along the entire length of the belt,
providing the range of an external antenna without the
drawback of sticking out from your dog. Because it
wraps around the neck along with the collar belt, the
MAXX-Range Antenna provides 360˚ degrees of
signal reception and is not blocked by your dog’s
body, regardless of which direction your dog is facing.
Beeper Wire (SPT 2430/2432 only)
- The Beeper
Wire provides power and communication from the
Collar Receiver Unit to the Beeper Horn.
Unit
Dimensions
Weight
Transmitter
6” x 2” x 1 1/4”
7.4 oz.
Collar Receiver
8.2 oz. (with belt)
9.6 oz. (with beeper belt)
2 5/8” x 2” x 1 1/2”
Transmitter and Collar Unit Specifications
