18
It is very important to set the correct intensity level on
your SPT 2400 series
Training System before
beginning your training sessions to provide the proper
level of stimulation without over-stimulating your dog.
NOTE:
All SPT collars have 50 intensity levels (1 is
the lowest and 50 the highest). The current Intensity
Level is shown on the LCD Display. To change
intensity levels at any time, simply press the Intensity
Level Up or Down buttons (on the right of the
transmitter). You can change the level one step at a
time by tapping the buttons, or you can rapidly change
levels by holding down a button.
1. Decrease the Intensity level so that the system is
set on Level 1.
2. Turn on the Collar and then fit it properly around
your dog’s neck (see
page 17
).
3. Press either the ‘NICK’ or the ‘STIMU.’ Button and
check for a reaction. Indications of your dog
feeling the stimulation include outward signs of
discomfort or confusion on it’s face, ears perking
up, changes in tail movements, etc.
4. Increase the Intensity Level in increments of one
until the dog feels the stimulation.
5. At this point, increase the Intensity Level by one or
two. This should be your dog’s ideal training level.
NOTE: Some dogs may require more or less
stimulation depending upon their individual
temperament and/or size.
SETTING THE INTENSITY LEVEL
