This option will reset the MultiChoice decoder to the original factory default values. All changes
made to the settings of the decoder will be lost. Settings such as tuning parameters, language
options, etc. will all be reset.
It is not recommended that you reset your decoder to factory defaults, unless requested to do so
by a MultiChoice Call Centre, Agent, Branch or MultiChoice Accredited Installer.
The Default values are as follows:
LNB CONFIGURATION
LNB is
:
Enabled
LNB Power
:
ON
LNB Mode
:
Dual Frequency
LNB Hi Frequency
:
9750
LNB Lo Frequency
:
10700
Orbital Position
:
PAS7/10
NETWORK SET-UP
Network Set-up 1 – Home
Signal Set-up
:
Enabled
Orbital Position
:
PAS7/10
Use NIT
:
Yes
Frequency
:
11594
Symbol Rate
:
27500
Polarisation
:
Vertical
FEC
:
5/6
Note : Any additional networks that have been set up will be lost if the decoder is reset
to the factory defaults.
PARENTAL CONTROL
Parental Level
:
R18
Blocking Options
:
No Block
42
MultiChoice 933 Digital Satellite Decoder
FACTORY RESET
