Installing the wall mount:
1.
Mount the wall mount part (with 4
mounting holes) to the rear of the
Ranos dB using the M8x16 screws
and M8 rings that were supplied
with the pole mounting kit,
using a Philips 3 screwdriver.
The bracket should be oriented
in such a way that the tapped M4
screw hole is at the bottom.
2.
Mount the other half of the wall
mount to the wall or a surface
using the screws from the screw
kit, or supply your own.
3.
Hang the Ranos dB into the wall
mount such that the vertical
parts hook into each other.
4.
Align the through hole and tapped
holes at the bottom of the wall
mounting brackets.
5.
Insert the M4x12 screw from
the bottom through the wall side
mounting bracket, into the tapped
M4 thread of the Ranos dB side
mounting bracket and tighten
hand tight.
Page 24 of 56