Microphone extension mount
installation:
1.
Install the pole mounting bracket
to the extension arm using the two
supplied M8x20 screws, rings and
nuts. Orientation does not matter,
as the mount is symmetrical.
2.
Install the microphone clamp to
the extension arm using the two
of the four M4x12 screws and nuts
and a Philips 2 screwdriver.
3.
Insert the screw and nut for the
microphone clamping part and
turn the screw a few times just
to keep them in place.
4.
Insert the microphone diaphragm
side first through the bottom of the
microphone clamp, in such a way
that the microphone will point up.
Slide the microphone trough until
it stops against the cable gland of
the microphone.
5.
Tighten the microphone clamp
screws until the microphone is
secured firmly.
6.
Loosen the pole clamp until it
opens and insert it through the
pole mount bracket.
7.
Wrap the clamp around the around
the pole and back into the other
end of the pole clamp.
Page 22 of 56
