DSPPA D6201 Page 27 User Manual Download

Page: 27 / 28

Guangzhou DSPPAAudio Co., Ltd.

Caution

●

The device is not completely disconnected from power source when it is switched "OFF". For sake of safety,

please disconnect the device from the socket if it is not in use.

●

Please keep this device off water drops or splash or vase filled with water or any other articles of similar

nature.

●

Please do NOT remove the cover of the equipment, otherwise you may get an electric shock. Where

necessary, repair to the equipment should be conducted by qualified professionals.

●

All terminals on the device marked with

are live and dangerous, and should be connected by trained

personnel.

●

This is connected to power source via the plug and any failure or danger occurs, the user can disconnect the

device from power source by pulling out the plug out from the socket, therefore, it is required that the power

socket should be located somewhere with easy access.

Summary of Contents for D6201





























Search results

Summary of Contents for D6201

Reviews:

Related manuals for D6201

Brands by name

Popular brands

DSPPA D6201, User Manual

Search results

Summary of Contents for D6201

Reviews:

Related manuals for D6201

Brands by name

Popular brands