DSPPA D6201, User Manual

Page: 21 / 28

* *
Conference Host
16
the drop-down menu, and then touch the desired
option. Then close the setup interface and return
to the main interface.
2) "Export configuration file to USB flash disk

With this conference system, the user can back
up the system to or restore the system from a
USB flash disk. Before the export operation,
please make sure that a USB flash disk has
been connected to the USB port of the
controller, otherwise the system will prompt:
"No USB flash disk found, please check".

Touch the "Export configuration file to USB
flash disk" to complete the exportation
operation. A dialog will show in the interface,
indicating that the exportation operation has
been successfully completed.
3) Import configuration file to the system

With this operation, the user can restore
backup system parameters to the conference
controller system, in order to restore such
parameters. Before the import operation,
please make sure that a USB flash disk has
been connected to the USB port of the
controller, otherwise the system will prompt:
"No USB flash disk found, please check".

Touch the "Import configuration file to the
system", and then touch the "OK" button in the
dialog box to copy the configuration file to the
system. After the configuration file is copied to
the system, the system will be restarted
automatically in order to load the system
parameters restored.
4) Modify the password on the equipment
The user can touch the "Modify the password"
button on the "General Setup" interface to enter the
password modification interface which is as shown
below:

The user may set a password for accessing the
"System Setup" interface.

To modify the password, the user need to input
the current password, which is 111111 by
default, and then touch the "OK" button to
enter the new password and confirm the
password by input such new password again.
The new password will take effect after the
user reconfirms such password.

Every time when the user attempts to enter the
"System Setup" interface, he/she should enter
the password, so it is strongly recommended to
remember the password.
5) Machine Code of this Equipment
On this interface, the user can view the machine
code, which is set when the equipment is delivered
from the manufacturing factory. Each equipment
has a unique machine code.