DSPPA D6201, User Manual

Page: 14 / 28

* *
Conference Host
9
The functions provided on the system setup
interface include:
"Network Setup"
"Camera Tracking and Positioning"
"Unit Inspection"
"Unit ID"
"Unit Setup"
"Time Limit for Speeches"
"Microphone On/Off tone"
"System Time"
"Display"
"General"
4.2.1Network setting
The Network setup includes "IP address", "Subnet
mask" and "Gateway" settings of the host controller.

Assign a unique IP address to the conference
controller. Touch the boxes after the "IP
Address" and the cursor starts to blink, at this
time, the user may touch the "Modify" button
to call the "IP Address modification" interface,
in order to modify the IP address. The interface
is as shown below:
Move the input cursor behind the number you want
to change, touch the red “DEL” button to delete the
original number, and then use the numeric keypad
to enter the target number, touch the “OK” button to
confirm and exit the input interface. The procedures
for setting up the subnet mask same as those of IP
address.

The method of setting the subnet mask and
gateway is the same as the IP address setting.

After all the settings are completed, the
interface will automatically pop up a message
saying "requiring system restart to take effect."
Then restart the system.
4.2.2 Camera Tracking and Positioning
The user may touch the "Camera Positioning" icon
on the "System Setup" interface to enter the camera
tracking and positioning setup interface, which is as
shown below:
On this interface, the user may select the desired
communication protocol of cameras and can set up
the swing speed of cameras and can enter the
camera positioning interface for further operation.
Tips: No speech will be delivered on the
conference units during the setup period of
camera tracking and positioning functions.

Communication protocol: D62 series smart
digital conference system provides three
options: PELCO D -9600, PELCO P -9600 and
VISCA -9600. In order to select the desired
option, the user can touch the black arrow after
the protocol box to open the drop-down list,
and then touch the target communication
protocol in the list to complete the whole
operation. The communication protocol may
vary from cameras of different brands,
therefore, all the four cameras connected to the
controller must be products of the same brand.

Swing speed of camera: With this option, the
user can set up the step size when the camera
swings. Larger step size means faster swing
speed, and the swing range will be larger,