DSP
EAKER
S
ERVO
300
2.2.4 Automatic Wakeup and Standby
The speaker will go to power saving “Stand By” mode deactivating it's power
amplifiers when it has detected no input signal in 15 minutes. The speaker will also
wake up automatically when it detects signal at the audio input. Wake up will take a
few seconds as the power amplifiers must be turned on. When the speaker is
detecting audio signal at the input in stand by and waking up, it will flash the led
green once. The speaker is on when the led turns green or orange, depending on
whether the AntiMode correction was on or off before going into the stand by
previously.
If the speaker is not used for longer periods, it is adviceable to turn it off completely
from the power switch.
Rev. 1.6
21.06.2010
Page 9 (16)
