DSP
EAKER
S
ERVO
300
2.1 Placing the Servo 300 Speaker
Servo 300 speaker is designed to be positioned close to the room walls and corners, where
the response can be extended even as low as below 30Hz. However, safe distance of 10 cm
(4 inches) to curtains or any other objects behind the speakers must be maintained to allow
sufficient ventilation for the amplifiers. Do not place any flammable objects or materials near
the amplified back plates. The speaker is equipped with builtin version of highly acclaimed
AntiMode
TM
room correction algorithm. AntiMode
TM
will automatically flatten the power
response and minimize modal ringing of room resonances at the frequency range 24 152
Hz. Because of this, Servo 300 will feature a lot more accurate bass control than for
example bass tone controls present in other active loudspeakers.
For improved stereo imaging, it is adviceable to use acoustic treatment in the side walls next
to Servo 300, or maintain at least 2550 cm (1020 inches) distance between the speaker
and side wall. Shorter radius, even only 15 cm (5 inches) is usually enough to the back wall.
Always keep the back panel of Servo 300 away from flammable objects, as the power
amplifiers generate always some heat. Servo 300 has revolutionary acoustic DXT lens,
which will give perfect radiation pattern to +/ 25 degree angles, as well as superb baffle
integration leading to well distinguished inroom response at also higher frequencies.
Rev. 1.6
21.06.2010
Page 7 (16)
LISTENING ZONE
