DSP
EAKER
S
ERVO
300
2.6 Output Gain Switch
DSPeaker Servo 300 has three settings for different output levels.
0dB is the default setting, which is suitable for farfield dynamics. It gives the highest peak
sound pressure level. However, it also has creates servofeedback which can sometimes
result in higher noise level than desired for near field usage.
6dB will drop the output level by 6dB, which will result in lower noise level, but also
decreased maximum sound pressure level. This setting is ideal for listening in farfield in a
very silent room where the ambient background noise is low.
12dB will drop the output level by 12dB, which will result in very low noise level, but also
decreased maximum sound pressure level. This is an ideal setting for listening in nearfield
monitoring where the distance to the speaker is less than 1 meter (3 feet).
Rev. 1.6
21.06.2010
Page 13 (16)
