A
NTI
-M
ODE
2.0 D
UAL
C
ORE
O
WNER
'
S
M
ANUAL
4.8
Input Settings
Input settings can be configured from this menu.
USB Volume controller defines how the volume is controlled during USB audio mode.
By Remote
keeps the volume control in the hands of the user. In this mode the PC
does not control the volume. By selecting
By Computer
you allow the PC to control the
volume, and the volume control buttons are just reported to the PC through HID
(human interface device). It is upto the PC to interpret the buttons and perform the
appropriate action.
Please note that selecting
By Computer
may cause a high volume to be set from the
PC, so be careful in this mode, especially when you connect Dual Core to the PC for
the first time.
The
Volume trim
menu allows compensation of different volume levels between the
digital and analog inputs. For example, if the digital input is subjectively louder, adjust
the volume trim value towards the left side until the volume levels are equal. Changes
in this dialog take effect immediately. Press the
OK
button on the remote to accept the
new adjustment or press the
BACK
button to discard changes.
The
Input sensitivity
setting adjusts the maximum allowed voltage level of the analog
input. Default value is high sensitivity. Use the low sensitivity setting, if you connect a
device which produces very high voltage levels and you get clipping warnings.
Notice: Input sensitivity and volume trim are global settings, i.e. the values are shared
by all four sound profiles.
4.9
Language Selection
When you first turn on the unit, you are asked to select a language for the user
interface. Using ”Language Selection” you can later change the language. Currently
the available languages are English, Finnish, Swedish, Dutch, and German.
Rev. 1.0
2013-06-04
Page 21 (32)
In-Sens: Low
USB Volume
INPUT SETTINGS
Volume Trim
VOLUME TRIM
Close
ANALOG
S/PDIF
00.0 dB
USB VOLUME CTRL
By Computer
By Remote
