A
NTI
-M
ODE
2.0 D
UAL
C
ORE
O
WNER
'
S
M
ANUAL
(9) The Currently active sound profile (designations “A” to “D”). Press the corres-
ponding button on the remote to select a new active sound profile. See the ”Using
Sound Profiles” section for further information.
➢
The active input can be switched by pressing the
INPUT
button on the remote.
Note
: You can also select next or previous input using arrow buttons, if you assign the
INPUT function to the buttons from the
Homescreen
menu. This way, you don't need to
cycle though the inputs with the
INPUT
button.
➢
Press the
OUTPUT
(
green
-coded) button to switch between the digital and analog
output modes.
➢
Press the
BYPASS
(
orange
-coded) button on the remote to toggle the room
correction on and off. The background of the home screen turns red when Anti-Mode
room correction is NOT active.
➢
Press the
DISPLAY
button (
blue
) on the remote to toggle screen dimming. The
dimmed mode is less obtrusive with much less information on display. The state of
the display is saved when you switch the unit to stand-by state using the
standby
button.
➢
Keep the
DISPLAY
button pressed for 2 seconds to turn the display off completely
(this state is not saved).
➢
By default
OK
activates the main menu.
➢
The default functions for arrow keys are QuickTone actions:
UP
/
DOWN
control
Bass,
LEFT
/
RIGHT
control Treble.
QuickTone can be used to quickly perform full-spectrum adjustments from the home
screen using the arrow buttons. This is extremely useful when the user wants to
quickly and often compensate for too bright or subdued recordings. QuickTone is a
short-cut to automatically activate the filters of the House Curve and Tilt curve tools,
which means using it overrides any settings on them. Use the
Homescreen
menu
under
Settings
to configure the arrow buttons for different functions.
When you use the QuickTone controls at the home screen, the applied curve is briefly
shown on the screen as simplified shape of the frequency response. You can adjust the
curve between flat (no curve) and very strong curve using 1dB steps.
When you adjust only bass or treble using QuickTone (the default), the other
adjustment is not changed.
Rev. 1.0
2013-06-04
Page 11 (32)
