A
NTI
-M
ODE
2.0 D
UAL
C
ORE
O
WNER
'
S
M
ANUAL
When you use the QuickTone controls at the home screen, the applied curve is briefly
shown on the screen as a simplified shape of the frequency response. You can adjust
the level of the applied curve between flat (no curve) and very strong curve using 1dB
steps.
When you adjust only bass or treble, the other adjustment is not changed.
4.7
Audio Settings
Audio settings can be configured from this menu.
Use the manual channel balance adjustment to match the levels of the left and right
speakers. Changes in this dialog take effect immediately. Press the
OK
button on the
remote to accept the new adjustment or press the
BACK
button to discard changes.
All internal processing is performed with 32- or 40-bit accuracy with the appropriate
number of bits reserved for headroom. However, if emphasizing (amplifying) filters are
used, some input signals could cause saturation / clipping at the output. The unit
automatically calculates the best headroom setting from the gains of the active filters.
However, if you only use the analog input and do not use the full input range, you can
change the headroom setting to a lower value. If the automatically calculated value is
too small (causing clipping at output), you can manually increase the headroom value.
The headroom value is automatically re-calculated any time you calibrate or change
filter settings, so remember to re-do your own adjustment in these cases.
When performing calibration in the advanced mode, you can select different dip
compensation modes: normal, maximum, or no dip compensation. Using the
Compensation
adjustment you can manually increase or decrease the lowpass shelve
filter effect that was automatically determined by the calibration. Note that this
adjustment does not affect the before / after measurement display, but you can
perform a user measurement to determine the best value.
Notice: channel balance, headroom, and dip compensation values are associated with
the current sound profile.
Rev. 1.0
2013-06-04
Page 20 (32)
CHANNEL BALANCE
Close
L
R
00.0 dB
Ch. Balance
AUDIO SETTINGS
Headroom
Compensation
DIGITAL HEADROOM
Close
Min
Max
00.0 dB
