PWR-DSP3
User Manual
Page 13 of 27
Copyrights DSP4YOU ltd
3.4
Step by Step guide
The PWR-DSP3 is a powerful amplifier and could easily damage your system if incorrectly configured. Do make sure to
follow these basic step by step instructions for your first time operating the product.
1.
Read the user manual and take the time to familiarize yourself with the virtual devices inside the software.
2.
Connect the amplifier to the you ethernet Network.
Do not connect any speaker load yet
!
3.
Connect the amplifier to the AC in PowerCON connector. The PWR-DSP3 will automatically appear in the
AVBStreamer toolbox.
4.
Load the configuration required to the amplifier
5.
Once correctly configured, turn OFF the amplifier by disconnecting the AC plug to connect your speakers.
6.
Turn the Master volume control (back of the unit) down to minimum and
7.
Plug your unit back to the AC power for the PWR-DSP3 to automatically appear in the AVBStreamer toolbox.
It is recommended to access the audio settings page to gain control over the amplifier.
8.
Slowly increase the volume at the back of the amplifier and enjoy your PWR-DSP experience!
3.5
AVB Streamer Tools setup guide
A Windows PC environment requires the following specs:
Software
-
Microsoft• ® Windows® Vista® SP1/ XP pro SP2 / Windows 7
-
Microsoft• ® .NET framework v3.5
-
Latest version of Adobe Flash web plug-in from Adobe.com website :
http://get.adobe.com/flashplayer/
-
Latest version of the Adobe Air environment from Adobe Website:
http://get.adobe.com/air/
Hardware
-
PC with 1GHz or higher processor clock speed recommended / Intel® Pentium®/Celeron® family, or AMD
K6®/AMD Athlon®/AMD Duron® family, or compatible processor recommended.
-
256 megabytes (MB) of RAM or higher recommended
-
Ethernet card (100/1000Mbps)
-
Keyboard and mouse or compatible pointing device
Step1: Pre-installation steps
-
Install .net framework and .Air environment on your PC.
Step2: Download the AVBStreamer Tools package
-
Login with your user account on miniDSP/DSP4YOU website to gain access to the secure section
-
The latest version of the AVBStreamer tools will be available from the User Downloads section.
Step3: Installation
-
Launch AVBStreamer Toolbox.exe
Following a successful installation, AVBStreamer tools will automatically start and discover modules on the network if
already connected. Note that if you were not connected to internet at the time of software installation and didn’t
update you Flash/Flex installation, the software will not boot up. Make sure to connect to Internet to get the latest
release of Adobe environment.
Step4: Because the AVBStreamer requires Ethernet to communicate to the units, Windows OS may warn to “Unblock”
the software with the message below. Make sure to click on “Unblock” or you will not be able to access units.