PWR-DSP3
User Manual
Page 11 of 27
Copyrights DSP4YOU ltd
3
Setup guide
3.1
Box content
Box Content
1 x PWR-DSP3 amplifier module
1 x CAT5 patch cable
3 x Molex conn 6 inserts to be crimped to speaker cable.
Startup guide
Optional accessories available at webstore and required for operation
PowerCON 20A NAC3FCA (Required for AC cable)
M4 T Nuts (12pcs required per PWR-DSP3) to mount unit to your enclosure
3.2
Mounting instructions
The PWR-DSP3 is a plate amplifier module intended to be installed at the back of a custom loudspeaker enclosure.
See the mechanical drawing at the end of this document for more information.
3.2.1
Mechanical installation of PWR-DSP3
Mechanical dimensions of the PWR-DSP3 and required opening are available
here
. CAD drawings are also available
on request. We recommend the use of either 12 x M4 or 12 x wood screws to insure proper mounting of the PWR-
DSP3 to your speaker enclosure.
3.2.2
Thermal consideration
Although very efficient, the PWR-DSP3 is a powerful amplifier and will generate heat. (See thermal specifications for
more information). Two generic thermal designs apply: