A-60
87: Timer
The 12X features a sophisticated Timer System with three
timers. An integrated timer keeps track of total Tx-on time for
the current selected model and integrated time is displayed
on the Main display. Two other timers can be configured as
Countdown timers or as Stopwatches. These timers also appear
on the Main display when active and can be started and stopped
via various switches. In addition an interval function can be
programmed such that alarm will sound at preprogrammed
intervals. A Down Alarm can be programmed that will sound
an alarm prior and up to the programmed count down time and
a one-time function sounds the alarm once, or continuously,
when the time is reached.
1. To configure the timers, highlight and select Timer in the
FUNCTION LIST to obtain the Timer display.
2. Highlight and select INH under TIMER1 or TIMER2 and
then select DOWN-T of STOP W. Use the Selector to set
the countdown set time, interval, down alarm and one
time functions. Once the timer is set, TIM will appear on
the Main display in the lower left corner. The timers can
be programmed to several different buttons or switches.
Use the Selector to highlight the desired button or switch
to operate the timer. Press the Selector to confirm the
selection. The desired set time, beep interval, down alarm
can be set as desired. When the One Time function is ON,
the timer will start with the switch selected, but pressing the
switch again will have no effect. If the One Time function is
OFF, the timer can be stopped and restarted as many times
as desired with the switch selected.
3. To Reset the Integrated Timer, highlight and select the
time under INTEG-T and Push [CLR]=0:00 appears on the
display. Press the CLR button to the left of the display to
reset the integrated timer.
Note
: To reset the stopwatch or countdown timer, use the
roller to highlight the Stop or Down then press the CLR
button.
Summary of Contents for JR 12X
Page 191: ...W 5...