S-13
To Adjust the Trim Rates
1. Highlight and select TRIM SYS. in the SYSTEM MODE to
acquire the Trim System function.
2. Highlight and select the trim that is to be changed and
use the Selector to set a value of 1–10 (1 = finest, 10 =
coarsest; Note: the Flap and AUX trims can be turned off or
on by selecting On or Off).
To Select the L.S.T. Trim Function
1. Highlight and select the desired channel (AILE, ELEV or
RUDD) next to (TYPE) L.S.T. and press the roller to select
L.S.T. or NORM.
2. Repeat for other channels as desired.
Note
: The Flap and Flaperon trims are adjustable from
0 to 200 and can be turned off or on by selecting On or
Off. Moment in the trim function is used to make the Flap
Trimmer and Flaperon Trimmer work as a momentary
on-off switch. If Moment is turned ON, pressing the
trimmer and holding will move the assigned function and,
when released, will return it to the original position. If
using an application that requires the Moment function
to be turned ON, also select the Trimmer to OFF. These
trimmers can be assigned to the aux channels in the
Device Select function.
3. Repeat for other trims as desired.
Summary of Contents for JR 12X
Page 191: ...W 5...