DSE RK Series Installation Manual Download

Page: 9 / 63

INSTALLATION MANUAL

RK SERIES - DVR and NVR

Page:

Plug in your monitor

Although the DVR / NVR can work without a monitor, you must necessarily connect one, at least for configuration operations.

You can use a computer monitor or a TV. The main, higher resolution monitor port is the HDMI port found in all modern TVs and

computer monitors.

There is also a VGA port if you need to connect a PC monitor from a few years ago.

DVRs / NVRs are factory programmed to provide low resolution (1280x1024) to be compatible with all monitors. Once you have

connected the monitor and started the DVR / NVR, you should increase the resolution of the video output up to the maximum supported

by your monitor (usually FullHD 1920x1080 or 4K).

If starting the DVR / NVR you only see the DSE logo and then nothing more, it is because the monitor does not support the video

resolution of the device. You have to connect another monitor and then eventually change the video resolution in the configuration

DSE SRL - ITALY - WWW.DSE.EU

Summary of Contents for RK Series
































































Search results

Summary of Contents for RK Series

Reviews:

Related manuals for RK Series

Brands by name

Popular brands

DSE RK Series, Installation Manual

Search results

Summary of Contents for RK Series

Reviews:

Related manuals for RK Series

Brands by name

Popular brands