INSTALLATION MANUAL
RK SERIES - DVR and NVR
Page:
6
USB
- You can connect the mouse included with the DVR to the USB ports and USB sticks for backing up video files. All DVRs also
have a front USB port.
AB RS485
- This is the RS485 serial port to which you can connect the control pair to control the motorized cameras. In fact,
motorized analog cameras require this additional connection for control. The RS485 BUS is a twisted pair that connects in cascade
all the motorized units of your system. Find more information on how to connect it in the camera manual. You will then need to
configure the transmission protocol in the PTZ configuration of the DVR. Motorized IP cameras do not require this connection
because they are controlled via the network cable.
DC 12V
- Connect the included 12VDC power supply here. Be careful not to confuse the power supply of the DVR / NVR, which has
at least 2A of power, with other smaller ones that you have purchased, perhaps for the cameras, because this would lead to
malfunctions. If you power the DVR with our centralized cassette power supply, you must consider that the individual outputs are
limited to 1A and it is therefore necessary to connect at least 3 in parallel to provide adequate power to the DVR.
DSE SRL - ITALY - WWW.DSE.EU
Summary of Contents for RK Series
