INSTALLATION MANUAL
RK SERIES - DVR and NVR
Page:
26
CHANNEL - Select the camera input you want to control
PROTOCOL - Choose PelcoD for all our PTZ cameras. You can also choose PelcoP for cameras from other manufacturers.
ADDRESS - Each camera located along the RS485 bus must have an ID address from 1 to 255. Normally the cameras have the
factory address 1 but you can change it by acting on the camera.
BAUD RATE / DATA BIT / STOP BIT / CHECK PARITY - These are the communication parameters that the DVR will use to
communicate with your camera. The most important is the Baud Rate that you can choose in the camera. The most common
speeds are 2400,
4800, 9600 bps. Check the manual of your PTZ camera to know the parameters to be entered. In general, the address and speed in
the camera are set with microswitches: check how they are positioned by comparing the manual.
DSE SRL - ITALY - WWW.DSE.EU
Summary of Contents for RK Series
