DSE DSE8661, Operator'S Manual, Page: 32 / 120

Specification
32
3.10 SOUNDER
The module features an internal sounder to draw attention to warning, shutdown and electrical trip
alarms.
Description Specification
Sounder Level 64 db at 1 m
3.10.1 ADDING AN EXTERNAL SOUNDER
Should an external alarm or indicator be required, this can be achieved by using the DSE
Configuration Suite PC software to configure an auxiliary output for “Audible Alarm”, and by
configuring an auxiliary input for “Alarm Mute” (if required).
The audible alarm output activates and de-activates at the same time as the module’s internal
sounder. The Alarm mute input and internal Lamp Test / Alarm Mute button activate ‘in parallel’
with each other. Either signal mutes the internal sounder and audible alarm output.
Example of configuration to achieve external sounder with external alarm mute button:
3.11 ACCUMULATED INSTRUMENTATION
NOTE: When an accumulated instrumentation value exceeds the maximum number as
listed below, it resets and begins counting from zero again.
Parameter Specification
Accumulated Power 999999 kW h / kV Ar h / kVA h
The values for accumulated power can be set or reset using the DSE Configuration Suite PC
software. Depending upon module configuration, this may have been PIN locked by the generator
supplier