DSE DSE8661, Operator'S Manual, Page: 107 / 120

Front Panel Configuration
107
8.1.3 EDITING A PARAMETER
NOTE: Pressing and holding the Instrumentation Scroll buttons gives an auto-
repeat functionality. Values can be changed quickly by holding the navigation buttons for a
prolonged period of time.
•
Press the Next or Previous Page buttons to cycle to the section which is required to be
edited. Press the Instrumentation Scroll buttons to cycle to the parameter within the
section chosen to be edited.
•
Press the Tick button to edit the parameter. The parameter begins to flash to indicate
that the parameter is being edited.
•
Press the Instrumentation Scroll buttons to adjust the parameter to the required value.
•
Press the Tick button to stop editing the paramter. The parameter ceases flashing to
indicate that it the parameter is no longer being edited.
8.1.4 EXITING THE MAIN CONFIGURATION EDITOR
NOTE: The editor automatically exits after 5 minutes of inactivity to ensure security.
•
Press and hold the Stop/Reset Mode button to exit the editor without saving changes.
•
Press and hold the Tick button to exit the editor and save the changes.