38
transmitting to the central station. For all formats excluding Automatic SIA and Automatic Contact ID, the panel will not attempt to report an
event if data
[00]
or data
[FF]
is programmed for the reporting code.
Section [350] Communicator Format
Program the 2-digit number for the desired Communicator Format for the First Phone Number and Second Phone Number. When dialing the Third
Phone Number, the system will use the Communicator Format programmed for Phone Number 1. Valid entries are
[01]
to
[06]
. Refer to the Program-
ming Worksheet for a list of the available Communicator Formats. Refer Appendix B: Communicator Format Options on page 51 for details.
Section [351]-[376] Communicator Call Direction Options
Reporting events are categorized into 5 groups; Alarm/Restoral, Opening/Closing, Tamper Alarm/Restoral, System Maintenance and Test Trans-
missions. Program which Phone Number the control panel will use to transmit reporting events by turning the option
ON
in the correct Section.
Phone Number 1 and/or Phone Number 2 can be used.
Section [377] Communicator Variables
Program a 3-digit number for each program entry:
Section [378] Test Transmission Time
Program the time the system will report a Test Transmission reporting event. Program 4 digits –
[HHMM]
using military standard.
For a test transmission at 11:00 pm, program data
[2300]
. Valid entries are
[0000]
to
[2359], [9999]
to disable.
Section [380] First Communicator Options
Swinger Shutdown (Alarms):
Maximum number of alarm/restoral transmissions per zone. Valid entries:
[000]
to
[014]
. Program data
[000]
to disable shutdown.
Swinger Shutdown (Tamper):
Maximum number of tamper alarm/restoral transmissions per zone. Valid entries:
[000]
to
[014]
. Program
data
[000]
to disable shutdown.
Swinger Shutdown (Maintenance):
Maximum number of trouble alarm/restoral transmissions per trouble condition. Valid entries:
[000]
to
[014]
. Program data
[000]
to disable shutdown.
Communicator (Transmission) Delay:
Time, in seconds, panel will delay reporting an alarm event. Valid entries:
[000]
to
[255]
.
AC Failure Communication Delay:
Time in minutes or hours, panel will delay reporting an AC trouble event or restoral.
AC Restoral communications follow the same delay
.
TLM Trouble Delay:
Time, in 3 second checks, before the system will consider the phone line disconnected. Valid entries:
[003]
to
[255]
(e.g., 3 x 3 seconds = 9 seconds).
TLM Restoral follows the same delay.
Test Transmission Cycle (Land Line):
Number of days or hours between test transmission reporting events. Valid entries:
[001]
to
[255]
.
Wireless Zone Low Battery Delay:
Number of days the system will delay reporting a wireless low battery to the central station.
Valid entries:
[000]
to
[255]
. Program data
[000]
for no delay.
Delinquency Transmission Delay:
Number of hours (Activity Delinquency) or days (Arming Delinquency) the panel will delay before
transmitting the event to the central station. Valid entries:
[001]
to
[255]
.
Communication Cancelled Window:
Time, in minutes, after an alarm has occurred that the system will report a Communication Cancel
reporting event if the system is disarmed. The keypad will display “Communication Cancelled” to indicate that the communication cancelled
reporting event has been successfully sent to the monitoring station. Valid entries:
[005]
to
[255]
.
Option
Description
[1]
ON: Communications Enabled.
The system communicator is enabled.
OFF: Communications Disabled.
The communicator is disabled.
[2]
ON: Restorals on Bell Time-out.
The system transmits alarm restorals if the zone is restored and the bell has timed out.
OFF: Restorals Follow Zones.
The system transmits alarm restorals immediately when the zone is restored.
[3]
ON: Pulse Dialing.
The panel uses rotary (pulse) dialing.
OFF:
DTMF Dialing.
The panel uses touchtone (DTMF) dialing.
[4]-[5]
Future Use
[6]
ON: Alternate Dial (1st & 3rd).
The system alternates between the First Phone Number and Third Phone Number when attempting
to report an event.
OFF:
Call 1st No. Backup to 3rd.
The panel will dial the First Phone Number for the programmed number of attempts, then switch
to the Third Phone Number.
[7]
For Future Use
[8]
ON: Delinquency Follows Zone Activity (Hours).
The Delinquency feature follows zone activity.
OFF: Delinquency Follows Arming (Days).
The Delinquency feature follows arming.
Summary of Contents for PowerSeries SCW9045-433 v1.0
Page 2: ......
Page 58: ...NOTES...