1
Section 1: Introduction
1.1 Specifications
It is recommended that a 7 Amp hour battery (minimum) be used
on the PC5020/P-8+ when the PC5936 is used.
NOTE: In order for the PC5936 module to operate properly, the
power output capability from the AUX terminals combined must
not be exceeded. Use the data presented below to ensure that the
PC5936 module is not overloaded when connecting audio stations.
Compatible Panels
DSC
Partner
PC5008 v2.1 and higher
PC5010 v2.0
P-832 v2.0
PC5015 v2.2 and higher
P-832DL v2.2 and higher
PC5020 v3.0 and higher
P-8+ v3.0 and higher
NOTE: The Verbal Door Chime and Verbal Alarm feature is only
available when using the PC5020/P-8+ v3.1.
PC5936 Audio Interface Module
• Standby current draw - 65 mA
• Maximum current draw - 100 mA
• Total current - providing capability between AUX terminals -
500 mA
• Input impedance at any microphone input - 25k
Ω
• Maximum music input signal level amplitude - 200mV peak to
peak
• Connect up to 7 audio stations (interior or exterior)
• Page function
• Monitor function
• Answer incoming calls
• Alarm output follower
PC5937 Eight-port Expansion Module
• Current draw - 5 mA
• Connect up to 8 audio stations (interior or exterior)
• Total current - providing capability between AUX terminals -
500 mA
• Input impedance at any microphone input - 25k
Ω
• Maximum music input signal level amplitude - 200 mV peak
to peak
PC5921 Interior Audio Station (Partner model P5922)
• Standby current draw - 20 mA
• Maximum current draw - 50 mA
• Built-in speaker and microphone
PC5921EXT Exterior Audio Station (Partner model P5922EXT)
• Standby current draw - 20 mA
• Maximum current draw - 50 mA
• Built-in speaker and microphone