2
S e c t i o n 2 : I n s t a l l i n g t h e
P C 5 5 0 2Z 2
This section describes how to mount, wire, and apply power to the PC5502Z2 keypad.
2.1 Unpacking
The PC5502Z2 package includes the following parts:
• One PC5502Z2 keypad
• Four mounting screws
• One keypad inner door label
• One set of Fire, Auxiliary and Panic key labels
2.2 Mounting
You should mount the keypad where it is accessible to designated points of entry and
exit. Once you have selected a dry and secure location, perform the following steps to
mount the keypad:
1. Remove the keypad backplate by loosening the screw located at the base of the unit.
2. Secure the keypad backplate to the wall in the desired location. Use the screws pro-
vided.
3. Before attaching the keypad to its backplate, complete the keypad wiring as
described in the next section.