DSC PC5132 Installation Manual Download Page 24

©2001 Digital Security Controls Ltd.

Toronto, Canada  •  

www.dsc.com

Technical Support: 1-800-387-3630

Printed in Canada   29004754 R002

LIMITED WARRANTY

Digital Security Controls Ltd. warrants the original purchaser that
for a period of twelve months from the date of purchase, the prod-
uct shall be free of defects in materials and workmanship under
normal use. During the warranty period, Digital Security Controls
Ltd. shall, at its option, repair or replace any defective product upon
return of the product to its factory, at no charge for labour and
materials. Any replacement and/or repaired parts are warranted for
the remainder of the original warranty or ninety (90) days, which-
ever is longer. The original owner must promptly notify Digital
Security Controls Ltd. in writing that there is defect in material or
workmanship, such written notice to be received in all events prior
to expiration of the warranty period.

International Warranty

The warranty for international customers is the same as for any
customer within Canada and the United States,  with the exception
that Digital Security Controls Ltd. shall not be responsible for any
customs fees, taxes, or VAT that may be due.

Warranty Procedure

To obtain service under this warranty, please return the item(s) in
question to the point of purchase. All authorized distributors and
dealers have a warranty program. Anyone returning goods to Digital
Security Controls Ltd. must first obtain an authorization number.
Digital Security Controls Ltd. will not accept any shipment what-
soever for which prior authorization has not been obtained.

Conditions to Void Warranty

This warranty applies only to defects in parts and workmanship
relating to normal use. It does not cover:
• damage incurred in shipping or handling;

• damage caused by disaster such as fire, flood, wind, earthquake

or lightning;

• damage due to causes beyond the control of Digital Security

Controls Ltd. such as excessive voltage, mechanical shock or
water damage;

• damage caused by unauthorized attachment, alterations, modifi-

cations or foreign objects;

• damage caused by peripherals (unless such peripherals were sup-

plied by Digital Security Controls Ltd.);

• defects caused by failure to provide a suitable installation envi-

ronment for the products;

• damage caused by  use of the products for purposes other than

those for which it was designed;

• damage from improper maintenance;

• damage arising out of any other abuse, mishandling or improper

application of the products.

Digital Security Controls Ltd.’s liability for failure to repair the
product under this warranty after a reasonable number of at-
tempts will be limited to a replacement of the product, as the
exclusive remedy for breach of warranty. Under no circumstances
shall Digital Security Controls Ltd. be liable for any special,
incidental, or consequential damages based upon breach of war-
ranty, breach of contract, negligence, strict liability, or any other
legal theory. Such damages include, but are not limited to, loss
of profits, loss of the product or any associated equipment, cost
of capital, cost of substitute or replacement equipment, facilities
or services, down time, purchaser’s time, the claims of third
parties, including customers, and injury to property.

Disclaimer of Warranties
This warranty contains the entire warranty and shall be in
lieu of any and all other warranties, whether expressed or
implied (including all implied warranties of merchantability
or fitness for a particular purpose) And of all other obliga-
tions or liabilities on the part of Digital Security Controls Ltd.
Digital Security Controls Ltd. neither assumes responsibility
for nor authorizes any other person purporting to act on its
behalf to modify or to change this warranty, nor to assume for
it any other warranty or liability concerning this product.

This disclaimer of warranties and limited warranty are
governed by the laws of the province of Ontario, Canada.

WARNING: 

Digital Security Controls Ltd. recommends that

the entire system be completely tested on a regular basis.
However, despite frequent testing, and due to, but not limited
to, criminal tampering or electrical disruption, it is possible for
this product to fail to perform as expected.

Out of Warranty Repairs

Digital Security Controls Ltd. will at its option repair or replace
out-of-warranty products which are returned to its factory ac-
cording to the following conditions. Anyone returning goods to
Digital Security Controls Ltd. must first obtain an authorization
number. Digital Security Controls Ltd. will not accept any ship-
ment whatsoever for which prior authorization has not been
obtained.

Products which Digital Security Controls Ltd. determines to be
repairable will be repaired and returned. A set fee which Digital
Security Controls Ltd. has predetermined and which may be re-
vised from time to time, will be charged for each unit repaired.

Products which Digital Security Controls Ltd. determines not to
be repairable will be replaced by the nearest equivalent product
available at that time. The current market price of the replace

ment product will be charged for each replacement unit.

Summary of Contents for PC5132

























Reviews: