manualshive.com logo in svg

DSC PC5020 Power864, Installation Manual

Share
Download
DSC PC5020 Power864 Installation Manual Download Page 3

i

New Features

PC5200 Support

The PC5020 v3.1 and higher supports the new PC5200 Power Supply module. See PC5200 Power Supply Output 
Module, Pg 2.

PC5936 Support 

The PC5020 v3.1 and higher supports the PC5936 15-station audio matrix module. See PC5936 Audio Interface 
Module, Pg 3.

SIA FAR

SIA False Alarm Reduction has been incorporated in this version. See the Quick Reference Chart SIA-FAR on the fol-
lowing page.

No Activity Arming 
(by Partition)

This feature enables the system (or partition) to arm if there is no zone activity for a programmed time period. See 
sections [191]-[198] - No-Activity Timer (Partition 1-8), Pg 30.

Programmable 
Auto-arm Pre-Alert 
Timer 

The Auto- arm Pre-alert Time is now programmable.  The default value for this timer has been extended to 5 minutes. 
See Section [199] - Auto-arming Pre-Alert Time, Pg 30.

Periodic Test 
Transmission
Exception

With this feature enabled, the panel will not send a test transmission if there has been any transmission received by 
the receiver within the programmed time. See Section [018] - Sixth System Option Codes, Option 1, Pg 27.

Cross Zoning 

This feature requires two or more trips on a zone(s) specified as “cross zones” within a specified time before starting 
an alarm sequence. The Cross Zone option is programmable by zone via Attribute 9.  See Section [018], Sixth Sys-
tem Option Codes,Option 6, Pg 28.

True Automatic 
Contact ID

When selecting Automatic Contact ID for reporting, the reporting code will represent how a zone is defined according 
to the SIA specification for Contact ID.  If Automatic Contact ID is enabled, see Appendix A for reporting codes that 
will be used for each zone type.

Keypad Buzzer 

When enabled and the system or Partition is in alarm, all assigned keypad buzzers will follow the bell output.  When 
disabled, the keypad buzzers will only sound for buzzer type alarms.  This option is off at default. See Section [018] - 
Sixth System Option Codes, Option 5, Pg 28.

New Zone Types

See Sections [001]-[004] - Zone Definitions, Pg 21.

Zone Type 27 - Delayed 24 Hour Waterflow Zone
Zone Type 28 - Instant 24 Hour Waterflow Zone
Zone Type 29 - Auto Verified Fire Zone
Zone Type 30 - Fire Supervisory Zone
Zone Type 31 - Day Zone

Waterflow Silence 
Inhibit Option 

This option affects the Instant Waterflow Zone and the Delay Waterflow Zone.  

This option does 

NOT

 allow the user to silence alarms, manually, automatically, or by a system reset until all waterflow 

zones are returned to their restored state. See Section [018] - Sixth System Option Codes, Option 4, Pg 28.

Verbal Door Chime 
and Verbal Alarm
Support

This feature enables the Door Chime to verbally annunciate the Zone that has been violated instead of a series of 
beeps. See Section [018] - Sixth System Option Codes, Option 2&3, Pg 33.  This feature is only available when using 

the 

ESCORT5580 v3.0

, and the 

PC5936 v1.0.  

Refer to the Escort5580 v3.0 and PC5936 v1.0 Installation Manuals 

for further information.

Loop Response

The PC5020 v3.1 and higher can configure any or all onboard zones for 36 ms Loop Response (see Section [030] - 
Fast Loop Response, Pg 29).

T-Link

The PC5020 v3.2 supports the T-Link TCP/IP Network Communicator.

Summary of Contents for PC5020 Power864





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands