4
Programming Access Codes with the LCD600 Keypad
With the system disarmed, press the [
∗
] Key and scroll to this message.
Press [5] to program Access Codes.
Enter the Master Code when this message is displayed.
This message will be displayed to indicate that Access Code 1, the Master
Code, is programmed. When scrolling through the list of Access Codes, a
“P” will be displayed in the lower right corner of the screen to indicate that
an Access Code is programmed.
Use the [<] and [>] Keys to scroll to the Access Code to be programmed.
When the desired code is displayed, or if you know the number of the code
you wish to program, enter a number from [1] to [8] to select the code. To
program Access Codes 9 through 16, press [9]. After pressing [9], use the
[<] and [>] Keys to scroll to the desired Access Code, and enter a number
from [1] to [8] to select a code from [9] to [16].
When this message is displayed, enter the new Access Code. Use only the
numbers from [0] to [9]; do not press [
∗
] or [#] when entering the code. To
completely erase a code, enter [
∗∗∗∗
].
Do not try to erase the Master
Code (Access Code 1)!
When the Access Code is programmed, a message similar to the one shown
here will be displayed. In this example, the message indicates that Access
Code 3 has been programmed. If [
∗∗∗∗
] is entered to erase a code, the
“P” will not be displayed.
When you are finished programming codes, press the [#] Key to return to the
“Ready” mode.
Turning the Door Chime Feature ON and OFF with the LCD600 Keypad
With the system disarmed, press the [
∗
] Key.
Use the [<] and [>] Keys to scroll to this message. Press [6], then enter the
Master Code.
Use the [<] and [>] Keys to scroll to this message. Press [6] to turn the Door
Chime feature ON and OFF. If the Door Chime is being turned ON, the
keypad will sound several quick beeps. If the Door Chime is being turned
OFF, the keypad will sound a single long tone.
When finished setting the Door Chime feature, press the [#] Key to return to
the “Ready” mode.
21
NOTES