background image

2

Features

Keypad Programmable

The PC1550 is complete with a default program so that it is
operational with a minimum of programming. The control panel is
completely programmable from the keypad.

EEPROM Memory

The panel uses EEPROM memory which will retain all program
information even if AC and battery power are removed from the
panel. The EEPROM memory can be reprogrammed thousands of
times.

Static/Lightning Protection

The PC1550 has been carefully designed and tested to provide
reliable protection against static and lightning induced transients.
Our special “Zap-Trac” circuit board design catches high voltage
transients right at the wiring terminals, and transient protection
devices are placed in all critical areas to further reduce damaging
voltages.

Supervision

• Low or disconnected battery

• Loss of AC power

• Fuse open

• Loss of time on system clock

• Microprocessor “Watchdog” circuit

Operation

• Download / Upload capability

• Programmable auto downloading

• Swinger shutdown

• Transmission delay

• Six access codes

• “Master key” code

• All zones programmable as fire zones

• Programmable test transmission

• Zone bypass from the keypad

• Six zones

• Bell / Siren zone

• Programmable output

• Three dedicated keys (Fire/Auxiliary/Panic)

• Backlit, aesthetically pleasing keypad

Specifications

PC1550 Control Panel

• Six fully programmable zones

- EOL resistor supervised option
- all zones programmable as fire zones.
- maximum zone loop resistance: 100 ohms

• Bell / Siren outputs: 1 amp

- steady for burglary
- pulsed for fire

• Programmable output: 300 mA

9 programmable options

• Auxiliary power output: 475 mA

• PC1500RK keypad, 3 maximum

• Sealed Battery 12 V

DC

, 4 Ah minimum

• Transformer: 16 V

AC

, 40 VA

• Panel dimensions:

- 10" high x 8" wide x 3" deep (254 x 208 x 76 mm)
- Surface mount

• Panel colour: light beige

PC1500RK Keypad

• Three keypad activated zones:

Fire ,  Auxiliary, Panic

• Backlit keys

• 5 system lights:

Ready ,  Armed ,  Memory ,  Bypass ,  Trouble

• 6 zone lights

• Keypad dimensions:

- 4.5" H × 4.5" W × 0.93" D (114 × 114 × 23.6 mm)
- Surface mount

• Keypad colour: mist

Summary of Contents for PC1550

























Reviews: