background image

18

PC1550 Version 4.0

[15]

Communication Variables

     

Page 11

Default

0 3

Maximum transmissions per burglary zone

Enter digits from “01” to “99” for number of transmissions per zone during the period as defined in Section [12], 1st System
Option Code, Zone Light 2. Note that “00” = unlimited transmissions per burglary zone. 

Fire zone always transmits.

Default

0 0

Delay before transmission (burglary zones only)

Enter digits from “01” to “99” - delay in seconds; “00” = no delay. 

Fire zone and 24 hour zone transmissions cannot be

delayed. 

Transmission delay as programmed here is for burglary zones only.

[16]

Zone Bypass Mask

     

Page 11

If the zone light is ON, the zone can be bypassed using the [

*

][1] command. If a zone is defined as a fire zone, it cannot

be bypassed.

Default

Default

ON

Zone Light 1

ON

Zone Light 4

ON

Zone Light 2

ON

Zone Light 5

ON

Zone Light 3

ON

Zone Light 6

[17]

System Times

     

Page 11

Default

Default

0 3 0

Entry Delay (seconds)

0 3 0

AC fail transmission delay (minutes)

1 2 0

Exit Delay (seconds)

0 5 0

Slow loop response time ( x 10 ms)

0 0 4

Bell Cut-off (minutes)

0 3 0

Test transmission cycle or auto download
cycle time (days)

Valid entries are “001” to “255”. 

Do not enter “000”.

Do not enter “000”.

Do not enter “000”.

Do not enter “000”.

Do not enter “000”.

[18]

Auxiliary Delay Loop Entry / Exit Times

     

Page 12

Default

0 4 5

Entry Time (seconds)

1 2 0

Exit Time (seconds)

Valid entries are “001” to “255”.

[19]

System Clock Times

     

Page 12

Default

9 9 9 9

Automatic Arming (time of day)

9 9 9 9

Test transmission or auto download (time of day)

Enter 4 digits - “00” to “23” hours; “00” to “59” minutes. If a feature is not used, leave at the default setting of “9999”.

For Sections [20], [21] and [22]:  Enter 4 digits from “0” to “9”. Do not enter [

*

] or [#].

[20]

New Installer’s Code

     

Page 12

Default

1 5 0 0

[21]

New Master Code

     

Page 12

Default

1 2 3 4

[22]

2nd Master Code

     

Page 12

Default

A A A A

The 2nd Master Code can be erased by entering [

*

1111]. AAAA = not programmed

Summary of Contents for PC1550

























Reviews: