DSC DSC-N114 User Manual Download Page 31

Page: 31 / 179

3.3

Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface, dwell

time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3. 7

Live View-General

The settings available in this menu include:

•

Video Output Interface:

Designates the output to configure the settings for, and only VGA/ HDMI

selectable by default.

•

Live View Mode:

Designates the display mode to be used for Live View.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-switch in

Live View.

•

Enable Audio Output:

Enables/disables audio output for the selected video output.

•

Event Output:

Designates the output to show event video.

•

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm event screen.

Setting Cameras Order

Summary of Contents for DSC-N114




















































































































































































Search results

Summary of Contents for DSC-N114

Reviews:

DSC DSC-N114, User Manual, Page: 31 / 179

Search results

Summary of Contents for DSC-N114

Reviews: