DSC DSC-N114 User Manual Download Page 27

Page: 27 / 179

3.1

Introduction of Live View

Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live

View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC many times

(depending on which menu you’re on) brings you to the Live View mode.

Live View Icons

In the live view mode, there are icons at the upper-right of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are alarms

occur as soon as possible.

Table 3. 1

Description of Live View Icons

Icons

Description

Alarm (video loss, video tampering, motion detection, sensor alarm or VCA alarm)

Event/Exception (motion detection, sensor alarm, or exception information, appears at

the lower-left corner of the screen. Please refer to

Chapter 8.7 Setting Alarm Response

Actions

for details.)

Summary of Contents for DSC-N114




















































































































































































Search results

Summary of Contents for DSC-N114

Reviews:

DSC DSC-N114, User Manual, Page: 27 / 179

Search results

Summary of Contents for DSC-N114

Reviews: