- 4 -
B:- KEQ20 Power Wiring
Remote In
: Connect a 22 to 8 gauge wire from the head-unit's remote turn-on to the
Remote Out
: Connect a 22 to 8 gauge wire to amplifiers
Remote connector on the KEQ20
Power (+12V) Connection
: Insert a 22 to 18 gauge wire into the connector labeled
Power on the connector of your KEQ20 Connect it to a good constant source of 12 volts,
fused at 2 amp.
Ground Connection
: Use the same gauge wire as you did for the positive connector and
run it from the Ground connector on the KEQ20 to a chassis ground with the length be as
short as possible to ensure a good ground connection.
Figure 3: Side view of KEQ20
Remote In
Front Output
Remote Out
Power +12V
Ground
Connectors
Crossover
Rear
Front
Speakers
Rear
Speakers
Sub-
woofers
System 1
Some Example of System Configuration
Front
Rear Output
Subwoofer Output
Front Input
Speaker
Level Inputs
Rear Input
Subwoofer
Remote
AUX
Input
Subwoofer
Input
