- 1 -
Introduction
The KEQ20
KEQ20
KEQ20
KEQ20
KEQ20
KEQ20
KEQ20
is a Six Channel Pre-Amp Equalizer Network with which you can install various types of
multi-amplifier systems in a car. The
is to be used with high quality power amplifiers and
speakers in a multi-amplifier system for hi-fi (high fidelity) sound reproduction.
You will be satisfied with the
provides maximum flexibility to configure every possible multi-
amplifier car stereo system. Before designing and installing your system, please read this manual
thoroughly so that you can set up the system that practically suits you. Having the
in the
center of your multi-amplifier car stereo system, your car stereo system will provide you with the
ultimate in hi-fi reproduction.
Key Features
This unit is designed for 12V DC operation only.
Avoid Installing the unit where:
- It would be subject to high temperatures, such as direct sunlight or from hot air from the heater.
- It would be exposed to rain or moisture
- It would be subject to dust or dirt
If your car is parked in direct sunlight and there is a considerable rise in temperature inside the
car, allow the unit to cool off before operating.
If this unit is placed too close to the car radio or any vehicle wires, an interference may occur, in
this case, separate the unit from the car radio and power wires.
Precautions
Dual-bandwidth Equalization:
Car interiors vary widely in size and acoustic make-up. The addition interior design don't make the
best location for speaker placement causing your high performance speaker system to sound not as
good as it could be. The
provide a maximum equalization control for each area of the audio
spectrum. One-third octave bass equalization combined with one-half and full octave high frequency
equalization offers an ideal level control.
10 Volts Pre-Amp Line Driver:
The
offers a high quality line driver that takes the low output voltage of a source unit and
increases it up to 18dB (13 volts peak). This allows you to maximize the signal-to-noise of your
system and drive your amplifiers to their maximum output without clipping. No hiss, clicks, or pops
plus maximum sound quality.
Speaker Level Inputs:
The
has a unique high impedance speaker level input that will interface with most head units
and let you add amplifiers and speakers to your audio system.
PFM Subsonic Filter:
This unique feature is able to fine-tune the bass response of any system. Why waste power on nasty
subsonic information when your Programmable Frequency Match (PFM) filter will help you clean things
up.
