- 2 -
KEQ20
KEQ20
KEQ20
KEQ20
KEQ20
KEQ20
KEQ20
Location and Function of Controls (outside)
1. Inputs: The
has two types of inputs, Pre-Amp and Speaker Level. These inputs should get
their signals from the main head unit and should attach to either
RCA jacks or speaker leads that are
coming out of your source unit. If your source unit has a front, rear and subwoofer pre-amp output,
connect them to identical inputs on your
. If the source unit only has front and rear inputs, don't
worry about losing your bass equalization, the
will automatically routes your subwoofer
equalization controls to the rear channels.
2. Input Gain Controls: These knobs allow you to increase or decrease the signal level from your
source unit to the
. Most aftermarket source units will require an increase whereas radios
installed by the automobile manufacturer will probably require you to decrease the signal level.
3. Equalization Controls:
Each of these knobs control the audio spectrum. They can be adjusted
the audio output to suit your personnel taste.
4. Output Level Controls: Although your
has the ability to increase your signal voltage to
13 volts peak, your amplifiers may not necessarily accept that much signal. These controls allow
you to regulate the proper amount of pre-amp signal from the
to the amplifiers.
5. Output Voltage Indicators: These LED's indicate the level of signal voltage that is coming out of
the various outputs of your
KEQ20.
6. Outputs: These RCA connectors should be connected to the next component after the
KEQ20
, such
as a crossover or amplifier. Do not connect any speakers directly to your
or to any home
appliances.
7. Power Connections:
With this connector, you can wire up the power, ground and remote turn-
on from the convenience and then casually plug it in the back of your
.
1
2
3
5
4
4
4
7
6
6
6
7
6
6
6
5
5
3
3
2
2
1
1
1
1
1
1
1
